Refining Flux

Performance characteristics

1.This product has the ability to efficiently remove the inclusions and gases in the molten aluminum, and the molten aluminum is purer after use, thereby greatly improving the quality of aluminum alloy products.

2.The use amount of this product is small, which is 1/4~1/2 of the traditional refining agent, and will not increase the use cost.

3.This product is a smokeless and environmentally friendly high-efficiency refining agent launched according to the national environmental protection requirements.

How to use, use temperature and dosage

1.Method of use: Inert gas injection method: use the injection device to spray the refining agent powder into the melt evenly, the injection speed should be strictly controlled, not too fast, If it is too fast, the refining effect will be deteriorated. The injection speed should be controlled at a quarter of the traditional speed. After spraying and playing, stir evenly, and let it stand for about 10 minutes before removing the slag.

2.Operating temperature: 700℃~750℃. Smoke is produced when the temperature is too high.

3. The amount of this product added: 0.05-0.12% of the amount of aluminum to be treated.

When the amount is too large, the slag will become wet slag, and the slag and aluminum will not be separated well when the slag is removed.Regular use can effectively dissolve the slag at the bottom of the furnace, keep the furnace clean, and improve the utilization rate of metals. If the wet slag phenomenon occurs when the dosage is large, the company’s environment-friendly slagging agent can be used to treat the wet slag and then remove the slag.